Magnetrol Level Products

 

Magnetrol Atlas

Atlas™ Magnetic Level Indicator

The ATLAS is our standard, high performance magnetic level indicator. The ATLAS is a single-chamber design, with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.

Access the Product Catalog or the Instruction Manual




Magnetrol Aurora

Aurora® Magnetic Level Indicator

The Aurora® combines the operating system of a conventional float-based magnetic level indicator (MLI) with the leading-edge Eclipse® guided wave radar transmitter developed for level measurement applications. The result is true level-measurement redundancy in a single-chamber design.

Access the Product Catalog or Instruction Manual.



Magnetrol Displacer

Displacer Switches - Single, Dual & Tri-Switch Series

Single Stage Switches

Series A10 displacer type level measurement units are wide differential units calibrated to actuate as a liquid level reaches a given displacer and to deactuate when the level reaches a second displacer. Single stage, wide differential displacer switches are factory calibrated yet field-adjustable to operate over a wide level differential band.

Dual-Stage Switches
Series B10 displacer type level measurement units are wide differential tandem switches that are factory calibrated with a choice of several switch operating sequences designed to meet virtually any application.

Tri-Stage Switches

Series C10 displacer type level measurement units utilize three electrically separate control signals in a selected sequence in response to liquid level changes.

Access the Product Catalog or the Installation Manual.



Magnetrol E3

E3 Modulevel® Liquid Level Transmitter

The Digital E3 Modulevel® is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.

Access the Product Catalog or the Installation Manual for E3 Modulevel® Foundations Fieldbus, E3 Modulevel® HART Manual, E3 Modulevel® SIL 3 Safety Manual, or the E3 Modulevel® SIL Safety Manual.




Magnetrol Echotech 910

Echotel® 910 Ultrasonic Level Switch

Echotel® Model 910 ultrasonic level switches utilize ultrasonic contact technology for measuring level in clean liquid applications. These integrally mounted level switches offer either a 8-amp DPDT gold flash relay or a 5-amp DPDT hermetically sealed relay. The 910 level switch is often installed into seal pots found in refineries and chemical plants.

Access the Product Catalog or the Installation Manual.




Magnetrol Echotech 940

Echotel® 940/941 Compact Economical Ultrasonic Level Switches

Echotel® Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. These switches feature a 316 stainless steel tip-sensitive transducer that is offered in a variety of NPT, flanged, and sanitary process connections. The compact electronics are completely encapsulated just above the process fitting.

Access the Product Catalog or the Installation Manual.




Magnetrol Echotech 961

Echotel® 961/962 Single- and Dual-Point Ultrasonic Level Switches

Increasing demands for compliance with safety systems and overfill protection have mandated more reliable point level measurement. Echotel® Models 961 and 962 ultrasonic level switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.

Access the Product Catalog or the Installation Manual for the Echotel® 961/962 Line Powered I&OEchotel® 961/962 Loop Powered I&O Manual, or the Echotel® 961/962 SIL Safety Manual.



Magnetrol Echotech 335

Echotel® Model 335 Four-Wire Ultrasonic Non-Contact Transmitter

The Echotel® Model 335 is a four-wire, integral mount, ultrasonic non-contact transmitter for liquid level, volume, and open channel flow measurement. Featuring advanced digital signal processing and a powerful transducer, this versatile transmitter provides exceptional measurement performance in a wide variety of applications.

Access the Product Catalog or the Installation Manual.




Magnetrol Echotech 335 2 Wire

Echotel® Model 355 Two-Wire Loop-Powered Ultrasonic Non-Contact Transmitter

Echotel® Model 355 is a loop-powered, non-contact-type ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART® communications are offered with a PACTware™ PC program for remote configuration and troubleshooting.

Access the Product Catalog or the Installation Manual.




Magnetrol Eclipse 705

Eclipse® 705 Guided Wave Radar Transmitter

The Enhanced Eclipse® Model 705 is a 24 VDC loop-powered transmitter based upon the revolutionary guided wave radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%.

Access the Product Catalog for the Eclipse® Enhanced 705 - Heavy Duty, Eclipse® Model 705 - Industrial, External Chamber - Sealed or Flanged Top or the Installation Manual.




Magnetrol Eclipse 705 GWR

Eclipse® 705 Guided Wave Radar Transmitter for Hygienic Applications

The Enhanced ECLIPSE Model 705 guided wave radar transmitter is available with a 304 stainless steel housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements for the wetted and non-wetted materials, process connections and surface finishes of hygienic industries.

Access the Product Catalog or the Eclipse® Enhanced 705 HART I&O Manual or the Hygienic Eclipse® Model 705 I&O Manual.



Magnetrol Eclipse 706

Eclipse® 706 Guided Wave Radar Transmitter

The Eclipse® Model 706 high performance transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven technology of guided wave radar (GWR). Encompassing a number of significant engineering accomplishments, this leading edge level transmitter is designed to provide measurement performance well beyond that of many of the more traditional technologies.

Access the Product Catalog or the Installation Manual.



Magnetrol Flanged Level Switch

Flanged External Cage Liquid Level Switches

Flanged external cage type level switches are completely self-contained units designed for side mounting to a tank or vessel with threaded, socket weld or flanged pipe connections. In hundreds of industrial applications throughout the petroleum refining, petrochemical production and power generation markets, these switches have demonstrated their worth through reliable and repeatable service.

Access the Product Catalog or the Installation Manual.




Magnetrol Gemini

Gemini™ Magnetic Level Indicator

The Gemini  MLI offers innovative level measurement in a special twin-chamber design.  A magnetic float and high-visibility indicator in the primary chamber operates independently of the Eclipse® Guided Wave Radar transmitter in the secondary chamber. This use of two differing technologies adds a layer of redundancy similar to the Aurora model.

Access the Product Catalog or Installation Manual.




Magnetrol HP Level Switch

High-Pressure External Cage Liquid Level Switch

High Pressure Liquid Level Switches are displacer actuated units, utilizing a single switch mechanism for level alarm or control functions. These units are designed for service pressures up to 5000 psig (345 bar) and liquids with specific gravities of 0.40 and above.

Access the Product Catalog or Installation Manual.




Magnetrol Horizon 704

Horizon™ 704 Intermediate Guided Wave Radar Transmitter

The Horizon™ 704 is a loop-powered, 24 VDC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the HORIZON 704 is integral mount on the GWR probe and allows local calibration via a 3-push-button keypad / LCD screen.

Access the Product Catalog or Installation Manual.



Magnetrol Jupiter

Jupiter® JM4 Magnetostrictive Level Transmitter

The Jupiter® JM4 liquid level transmitter is a loop-powered 24 VDC liquid-level transmitter and is available as a direct insertion transmitter or as an external mounted transmitter onto a Magnetic Level Indicator. It relies on the position of a magnetic float which is designed precisely for the liquid to be measured.  This high-accuracy device can be designed for liquid level and/or liquid-liquid interface measurement.

Access the Product Catalog or Installation Manual.




Magnetrol Kotron

Kotron® 082 RF Capacitance Level Transmitter

The Kotron® Model 082 transmitter is one of the most cost-effective level transmitters available today. Compact in size, it employs state-of-the-art surface mount technology in an encapsulated module for a stable, accurate measurement.

Access the Product Catalog for Kotron 082 or Kotron Probes or the Installation Manual.



Magnetrol Model F10

Model F10 Vane-Actuated Mechanical Flow Switch

Magnetrol® flow switches are highly reliable flow control solutions utilized to sense the presence or absence of flow in horizontal pipelines. Model F10 switches are vane actuated for use on gas or liquid flow applications in 2 inch or larger line sizes.

Access the Product Catalog or Installation Manual.




Magnetrol Model F50

Model F50 Disc-Actuated Mechanical Flow Switch

Magnetrol® flow switches are highly reliable flow control solutions utilized to sense the presence or absence of flow in horizontal pipelines. Disc-actuated Model F50 switches are in-line type used for sensing clean liquids in 2 inch or smaller line sizes.

Access the Product Catalog or Installation Manual.




Magnetrol FLS

Model FLS Floor-Mount Level Switch

The Model FLS Flood Level Switch is a float operated, liquid level control designed for bracket mounting at floor level sumps or troughs.

Access the Product Catalog.




Magnetrol J52

Model J52 Refrigerant Liquid Level Switch

The Model J52 Refrigerant Level Switches are float actuated units designed for use on liquids with 0.60 specific gravity and above.

Access the Product Catalog or the Installation Manual.




Magnetrol T10

Model T10 Cable Mounted Float Level Switch

The T10 float level switch offers industrial and municipal users a low-cost solution to wide differential level applications. The moving ballast causes a flipping motion of the float to provide positive switching action even under turbulent conditions. Recommended for use in either clean or dirty liquids, it is ideal for use in sump control and wet well applications.

Access the Product Catalog.




Magnetrol TK1

Model TK1 Liquid Level Switch

The TK1 liquid level switches are float-actuated devices designed for horizontal mounting in a tank or process vessel through threaded or flanged connections. This low-cost switch is ideal for OEM applications where a single point high or low level alarm is desired.

Access the Product Catalog or the Installation Manual.




Magnetrol EB40

Models B40 High Pressure/ High Temperature External Cage Liquid Level Switch

The B40 external cage type level switch is a float-actuated control specifically designed and constructed for high pressure, high temperature service conditions such as boilers. It is available in rugged industrial or ASME B31.1 construction.

Access the Product Catalog or Installation Manual.



Magnetrol C24 C25

Models C24/C25, Boiler, and Water Column Liquid Level Switches

Models C24/C25, boiler, and water column liquid level switches are single- or multi-switch units that offer versatility and reliable operation in a variety of applications. Available with up to three switch mechanisms for level alarm, control, and shutdown functions, the boiler and water column controls are designed for use in steam boiler applications while the Models C24 and C25 are for general use.

Access the Product Catalog or the Installation Manual.




Magnetrol T20 T21

Models T20 & T21 Top-Mounting Single-Stage and Dual-Stage Float Switches

Single Stage Switch

T20 units are simple, reliable float switches, designed for top mounting into tanks or vessels. T20 units utilize a single switch mechanism and float. It can be used for virtually any type of open or closed process or storage vessel, with either threaded or flanged type mounting, and actuating depths of up to 48 inches (1219 mm).

Dual Stage Switch

T21 units combine the functions of two separate narrow differential level controls in a single, compact, easy-to-install instrument. Two independent switch mechanisms are employed to provide two actuating levels at least 8” apart, at actuating depths of up to 48 inches (1219 mm), for applications such as high and low level alarm operation. Model T21 tandem float switches are available with optional cages to help stabilize the floats under turbulent conditions.

Access the Product Catalog or the Installation Manual.




Magnetrol T5x T6x

Models T5x & T6x Side-Mounting Float Switches

Magnetrol® side-mounting float switches mount horizontally to any tank or vessel through a threaded or flanged pipe connection. Standard models are normally equipped with a single switch mechanism for high or low level alarm or control applications. Tandem models, with two switch mechanisms, are available for two-stage applications.

Access the Product Catalog or the Installation Manual.




Magnetrol Pneumatic Displacer

Modulevel® Pneumatic Displacer Liquid Level Control

Modulevel® pneumatic liquid level controls are displacement actuated level sensors that provide output signals in direct proportion to changes in liquid level. Simple modular design and the MAGNETROL proven magnetic coupling make MODULEVEL controls versatile, highly stable, vibration resistant and adaptable to extremes in temperature and pressure.

Access the Product Catalog or the Installation Manual.




Magnetrol R82

Non-Contact Radar Model R82 Pulse Burst Radar Transmitter

Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.

Access the Product Catalog or Installation Manual.



Magnetrol Pulsar R86

Pulsar® Model R86 26 GHz Non-Contact Radar Transmitter

The Pulsar® Model R86 non-contact radar level transmitter is the latest generation of Magnetrol loop-powered, 24 VDC, liquid level transmitters. It has a longer measurement range, circular polarization, advanced diagnostics and is easier to use than most loop-powered radar transmitters.

Access the Product Catalog or Installation Manual.




Magnetrol Pulsar R96

Pulsar® Model R96- 6 GHz Non-Contact Radar Transmitter

The Pulsar® Model R96 is a loop-powered, 24 VDC, non-contact radar level transmitter. It has a longer measurement range, improved diagnostics and is easier to use than most loop-powered radar transmitters.

Access the Product Catalog or the Installation Manual.




Magnetrol 2

Series 3 ASME B31.1, ASME B31.3 and NACE External Cage Level Switch

ASME B31.1 Construction

Series 3 ASME B31.1 float-actuated level switches are designed, built, and certified to the requirements of ASME B31.1 power piping codes. They are ideal for critical alarm set points in clean liquid applications.

ASME B31.3 Construction

Series 3 ASME B31.3 float and displacer-actuated level switches are designed, built, and certified to the requirements of ASME B31.3 power piping code requirements. They are ideal for critical alarm set points in clean liquid applications.

NACE Construction

Series 3 NACE float and displacer-actuated level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.

Access the Product Catalog or Installation Manual.




Magnetrol Series B73

Series B73 and Series 75 Sealed External Cage Liquid Level Switches

Series B73 and series 75 external cage type level switches are completely self-contained units designed for side mounting to a tank or vessel with threaded, socket weld or flanged pipe connections. These float-actuated controls have proven their reliability in process control for decades.

Access the Product Catalog or Installation Manual.




Magnetrol Solitel

Solitel® Vibrating Rod Level Switch

Solitel® Vibrating Rod Level Switches provide reliable level detection of powders and bulk solids with densities of less than one pound per cubic foot. This compact, integral switch is suitable for high or low level detection in hoppers or silos.

Access the Product Catalog or Installation Manual.




Magnetrol Thermatel TD1

Thermatel® TD1/TD2 Thermal Dispersion Switches

The Thermatel® Model TD1/TD2 switch is utilized in flow, level and interface applications.  The TD1/TD2 is popular for pump protection, specifically low flow detection with the unique spherical tip design, to prevent pumps from running dry.  Continuous diagnostics with fault indication, temperature compensation and fast response time make the TD1/TD2 the latest in thermal dispersion technology.

Access the Product Catalog and Installation Manual.




Magnetrol Thermatel TG1

Thermatel® TG1/TG2 Flow/Level/Interface Switches with Din Rail

Thermatel® TG1/TG2 provides a two-wire, intrinsically safe circuit between the probe and remote din rail enclosure. The flow/level/interface switches provide a new level of performance and reliability not found in previous switches. Continuous diagnostics with fault indication, narrow hysteresis and fast response time make the TG1/TG2 the latest in thermal dispersion switch technology.

Access the Product Catalog and the Installation Manual.



Magnetrol Tuffy

Tuffy® Pneumatic Side-Mounted Float Switch

The Pneumatic Tuffy® liquid level switch is a compact pneumatic level switch designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections.

Access the Product Catalog and the Installation Manual.




Magnetrol Tuffy 2

Tuffy®II Side-Mounted Float Switch

The Tuffy® II buoyancy level switches are float-actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact size allows for installation in small vessels, while its many features provide a variety of application uses. The single switch mechanism is available in SPDT or DPDT forms on units designed for fixed or adjustable, narrow or wide differential and interface service levels.

Access the Product Catalog and the Installation Manual.



Magnetrol Vector

Vector™ Magnetic Level Indicator

Vector is a rugged, reliable and cost-effective Magnetic Level Indicator (MLI). Suitable for a variety of installations, Vector is precision-engineered and manufactured to ensure a long service life. It's built to the highest quality standards and is equipped with a high-visibility indicator which has a shatter-resistant viewing window. The Vector MLI virtually eliminates maintenance and is a great replacement for hard-to-see, leaky, sight and gauge glass indicators. Optional switches and transmitters are available to provide alarm points and level control.

Access the Product Catalog and the Installation Manual.



Contact us for product availability in your area.